This is a musical instrument tuner that runs on Windows.
This tuner is a chromatic tuner that responds to sound input. You put your sound into the tuner through a microphone, a line-in connection, or any other sound capturing device available.
You do not need any special hardware. Any ordinary or higher quality sound device on your computer would work fine with this tuner.
You may use this software free of charge.
This is not an open source project but a closed source freeware product developed by an individual personally. The copyright for this software is reserved by the author.
THIS SOFTWARE IS PROVIDED "AS-IS", WITHOUT ANY EXPRESS OR IMPLIED WARRANTY. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR DAMAGES OF ANY KIND.
OS:
Windows 11/10/8/7/Vista/XP/2000
CPU:
Intel Pentium Pro (i686), AMD Athlon (K7), or any later
You do not have to be an administrator in order to install this software. If you are a non-administrative user, install this software into a folder which you are allowed to manage.
If the microphone endpoint device has been selected as the default recording device on the OS side, you do not have to change any of the settings on the tuner side for now for testing. Just power on the tuner and give it some sound using your microphone. The tuner should respond to it.
If the tuner will not respond, your sound might not be loud enough. If you want to adjust the tuner's sensitivity, click the button [Settings] on the tuner's main window, then change the level of the sensitivity on the Tuning page of the dialog box just got invoked.
The tuner auto-detects the note of your sound and displays how far your pitch is away from the desired pitch in cents.
If your pitch is flat, it creates a negative difference against the desired pitch, making the needle point somewhere on the left side. If your pitch is sharp, it creates a positive difference, making the needle point somewhere on the right side.
If the tuner successfully catches the fundamental frequency of the input sound, every piece of information on the display will be simply what you expect. You can go on your tuning without confusion or misunderstanding.
If the tuner happens to catch the 2nd or 4th harmonic frequency, the octave number and the frequency shown in Hz will be different from what you expect, but the note name and the pitch difference shown in cents will be practically equal to what you expect. Though the tuning information is not perfect, you can go on your tuning with it.
If the tuner happens to catch the 3rd or 5th harmonic frequency, unfortunately everything on the display will be somewhat different from what you expect. In such cases, you might want to enable the tuner's "Harmonics aware" option which is found on the Tuning page of the Settings dialog box. With the option enabled, an extra search is carried out to find the fundamental frequency of the input sound. Note that the search may or may not result in success.
For example, if the tuner happens to catch the 3rd harmonic frequency of a sound from the 5th string of a guitar, it will display the note E. The "Harmonics aware" option can improve this situation and if it works as expected on that sound, the tuner will choose the note A.
If you want to check your sound visually, you can use the spectrum view. It can be invoked via the menu item [Tuning] > [Spectrum] located on the main menu. What the view shows is the spectral shape of the input sound, or what frequency components the input sound consists of. The tuner also put a vertical bar on the view to show its estimation of which frequency is the fundamental.
When you tune a bass instrument, you might want to enable the "Reduce needle sway" option which is found on the Tuning page of the Settings dialog box. With this option enabled, the tuner performs analysis on longer sound segments, which makes background noise less influential. The effect of this option may only be seen at low frequencies.
The use of the AC electric power for your computer may introduce a tonal noise which has the same frequency as the AC power. In the spectrum view, it will be seen as a short spike standing at the position of 50 or 60 Hz if any.
If the tuner often picks up that noise, you might want to eliminate it by using a hum noise removal filter, which is a notch filter that can be enabled on the Device page of the Settings dialog box. Be sure to set the filter's center frequency to your AC alteration frequency.
The trade-off is that the tuner will lose the chance to catch the 50-Hz or 60-Hz frequency component of the input sound, as the filter removes it together. If the input sound has some other harmonics at distant places, the "Harmonics aware" option might be able to help you.
If your computer is not too old, this is probably a matter of no importance, but if it is a really old one with Windows XP or any earlier running on it, your recording device might capture sound at a pace too inexact. Using such a device without any compensation for such inexactness will cause a constant bias to be introduced in sound pitch measurement.
For example, capturing sound at 44 kHz instead of 44.1 kHz makes a bias of 3.93 cents:
log2(44100 / 44000) * 1200 = 3.93...
This may cause a problem particularly when you use multiple tuning devices at once.
To make pitch measurement as accurate as possible, this tuner allows you to set a counter bias to balance that device-side inexactness. It is also possible to have the tuner calculate the proper counter bias for you. This feature can be called from the Device page of the Settings dialog box. The tuner will take a 30-second recording to know what pace the device actually runs at and then calculate the proper counter bias based on the number of samples actually captured. If you like, you can type in some biasing value manually, or provide the tuner with an external reference signal to find the proper counter bias.
The installer installs the following files onto your computer:
| File name | Description |
|---|---|
| note.ini | Data for note subtitle display |
| readme.txt | Contains this text |
| scale.ini | Data for musical scale setting |
| stuner.exe | The tuner |
| unins000.dat | Data for uninstallation |
| unins000.exe | The uninstaller |
| uninst.dll | Module for uninstallation |
| uninst.ini | Data for uninstallation |
| volctl.dll | Module for device volume control |
For information about the installer, visit the following site:
https://www.jrsoftware.org/ [Inno Setup home page]
The uninstaller can be called from Windows Control Panel or any modern equivalent.
The uninstaller removes all the installed files from the disk. You will be asked whether or not it should remove the per-user setting files the app created runtime. Just answer yes if you want the complete removal. This software does not use the Windows registry storage for its operation.
Version 1.6.0.2 2025/05/22
Version 1.6.0.1 2025/03/10
Version 1.6.0 2025/02/10
Version 1.5.0 2020/10/22
Version 1.1 - 1.4.5
Version 1.0 2006/06/26
Narumi Watanabe
E-mail: nw337305@next.odn.ne.jp
Home page: https://ss1.xrea.com/sandango.s322.xrea.com/
X account: https://x.com/nw337305