Settings

The Settings dialog box can be invoked by selecting the menu item [Tools] > [Settings]. This dialog box allows you to change the configuration of this app.

The dialog box has several pages each of which show the options and properties in its own category:


Basic Page

Temporary Folder (Project Folder)

The app stores temporary files in this folder. This folder should be located on a drive that has a large amount of free space. The app uses the system default location if this field is empty.

Save editing state of sound files

The app saves the editing state of the opened files when you quit this app, and reconstructs the state the next time you start this app. The app also switches projects the same way when you move to a different project while the app is running. See About Project for more information.

Enable Undo/Redo

The app automatically deletes the temporary files it has created as soon as each of them looses all references to it. When this option has been enabled, a large amount of disk space can be used to keep many temporary files for future Undo/Redo operations. You can manually delete such files and enlarge free space using the menu item [Tools] > [Clear Editing History].

Save by renaming temporary files if possible

When the user executes a command that saves a sound to a file, the app attempts to save the sound by renaming a temporary file instead of writing samples to a new file. The attempt results in success if the following requirements are satisfied:

  • The app already has a temporary file suitable for this operation.
  • The app does not have to move the temporary file to another drive.
  • The user has specified the WAV file format.

Always ask before closing each file

The app displays a message box whenever the user takes an action that causes an opened file to be closed.

Duplicate sounds along with all attached information

When making a whole or partial copy of a sound, for example, in response to the user's selection of the menu item [Edit] > [Copy to New], the app also copies its supplementary information, such as the title of the sound.

Link with system clipboard

The app links its own clipboard with the system clipboard for data exchange between applications. The sounds you put on the system clipboard should be of the sampling rate of 48 kHz or less and 1 minute long or less. Only 16-bit samples are used for this data exchange.

Use system file caching

Every time a PCM sound fragment is read from a disk, the system caches it so that subsequent reads for the same fragment will be done quickly. Unless you have much free space in the memory, you might want to disable this option so that other programs can make good use of file caching. Toggling this option does not take effect on sound files that you have already opened. You have to reopen them manually.


Playback Page

Playback Device

The app uses the specified playback device when it plays back sounds.

Use long buffer for stable playback

The app chooses the long buffer setting, which could reduce playback glitches.

Scroll view to show playback position

The waveform view occasionally scrolls to show the playback time position during playback.

Mono time-scaling output for music

The music time-scaler processes sound in mono even if the input is stereo. This simplifies the calculation and might save battery power.

Do not use CD drive's audio-out for CD playback

You have to enable this option for audio CD playback if you want to use a USB-connected drive or internal drive that has no audio line connected to the sound device.

24-bit playback

The app requests the playback device to use 24-bit samples when opening the device. On Windows Vista or later, you might have to set the playback device's sound format to something that uses 24-bit samples in order for this option to take effect.

You have to disable this option if you want the app to perform 16-bit dithering at playback time.


Recording Page

Recording Folder

The app creates recording files in this folder when recording sounds from the recording device.

File Name Template

Each recording will have a file name which consists of this base name and a unique number.

Set read-only file attribute

The app gives the 'read-only' attribute to every recording file it creates.

Open files after recording

The app opens the recording files it has created when the user closes the Recording dialog box.


Quality Page

Sample Type for Temporary Files

The app uses this type of samples to store sound data in temporary files.

Resampling Quality

This property determines the time span of low-pass filters which are used for resampling. A higher value increases the resampling quality, while requiring more calculation. The recommended range are 128 and higher.

Resampling Error

This property determines the shape of the Kaiser window which affects the characteristics of low-pass filters which are used for resampling. The shape of the window determines the attenuation level of the stop band and the width of the transition band. A smaller value makes the stop band more attenuated, while making the transition band wider. Note that -90 is smaller than -80. The default is -80 dB.

Convolution in double precision

Convolution operations are performed in double precision (64-bit floating point precision).

Enable 16-bit dithering (not for temporary files)
Enable noise shaping to improve S/N ratio

When saving a sound, the app performs dithering to prevent a certain kind of distortion if the sound is downgraded with the 16-bit sample precision. The noise shaping technique can be used together to make dither and quantization noise less noticeable. See Enabling Dithering and Noise Shaping for more information.

Note that when creating temporary files, the app performs neither dithering nor noise shaping. You can use 24-bit or float samples for temporary files instead.

Import 24-bit WMAs preserving 24-bit quality

When importing 24-bit WMA files, the app requests the WMA decoder to produce 24-bit samples.

Import 1-bit audio at 48 kHz or lower

When importing DSD 1-bit audio files, the app down-samples the sounds to 48 kHz or lower (44.1 kHz in most cases). With this option disabled, the app down-samples the sounds by the ratio of 1/32. For example, 2.8-MHz sounds are down-sampled to 88.2 kHz.


Plug-in Page

VST Plug-in Folder (VST3)

To use VST plug-ins with this app, you have to specify where they are located.

Load DirectX Plug-ins

DirectX plug-ins are DirectShow filters that produce audio effects. If you have such plug-ins, you can use them with this app by enabling this option.


Display Page

Save position and size of main window

The app saves the position and size of the main window when you quit this app.

Use system preferred font (restart required)

The app refers to the current system setting to decide which font to use for its user interface.

Fall back to MDI-based waveform display

The app sets up the MDI-based waveform display rather than the one with a tabulated file selector.

Initial Size of Waveform Views (width x height)

When a new waveform view is created in the MDI-based display, the size of the view is initially set to this.

Initial Length of Visible Waveform

When a new waveform view is created, it initially shows this length of waveform.


Color Page

On this page, you can change the color scheme for waveform graphs.


Keyboard Page

On this page, you can set or change which key stroke calls which command.

The following table shows some keyboard commands which might be used often:

Group Key Stroke Action
Playback Space Starts or pauses playback
Ctrl+ Space Starts playback from the visible part of the sound
Period (.) Stops playback
> Speeds up playback (you might have to use a shift key for this character)
< Slows down playback (you might have to use a shift key for this character)
View PageUp Scrolls the waveform view by one page toward the beginning of the file
PageDown Scrolls the waveform view by one page toward the end of the file
Left Scrolls the waveform view by some amount toward the beginning of the file
Right Scrolls the waveform view by some amount toward the end of the file
Home Shows the beginning of the file
End Shows the end of the file
Ctrl+ Left Selects another horizontal zoom level that is one step farther
Ctrl+ Right Selects another horizontal zoom level that is one step closer
Label Tab Moves the Start marker onto the next label
Shift+ Tab Moves the Start marker onto the previous label
Edit E Invokes the last audio effect invoked
Other F1 Displays Help

Import Page

File Name Extensions of Importable Audio/Video

You can register file name extensions that are associated with audio/video data types. When you open an audio/video file, the app will not ask you whether or not it should really open that file if the file is of registered type. You have to install necessary DirectShow filter modules in advance before you open such files with this app.

Use Media Foundation for M4A/MP4 (Win7)

The app uses the Media Foundation codecs for MPEG-4 audio/video (AAC/H264) files. Windows 7 or later is required.


Advanced Page

Sound Device API

The app uses the specified sound device API for controlling the playback and recording devices. The default is DirectSound.

Windows Vista and later:

If either of the shared mode and exclusive mode has been specified, the app uses the Core Audio APIs directly and takes responsibility for sampling rate conversion.

The exclusive mode enables you to get the best possible quality for both 44.1 and 48 kHz. The app tries to set up the device so that it will simply run at the sampling rate of your sound. If the setup succeeds, no sampling rate conversion takes place. If the setup fails, the app takes responsibility for sampling rate conversion, which requires extra calculation and might cause loss of quality. The sampling rates typically supported by a device include 44.1/48/96/192 kHz.

Note that while a sound device is being used exclusively, all the other applications and the system cannot use that device.

The dithering and noise shaping settings affect how the app produces 16-bit samples in exclusive-mode playback. This enables you to hear the exact 16-bit appearance of a sound while you are editing it. You have to turn off the 24-bit playback option to have the app perform 16-bit playback.

  • The dithering and noise shaping options are found on the Quality page.
  • The 24-bit playback option is found on the Playback page.

Note that it is after sampling rate conversion that the app performs dithering and noise shaping. If the sound file is 44.1 kHz and the device is running at 48 kHz, the app performs any necessary dithering and noise shaping at 48 kHz. You have to use a device that supports 44.1-kHz playback to hear 44.1-kHz sounds.

Max. Number of Parallelism Threads

The app takes advantage of multi-core CPUs for certain types of audio signal processing tasks. This property defines the maximum number of threads allowed to run for such tasks. See How to Fully Employ Your Multi-core CPU for more information.

Use floating point SIMD instructions (SSE etc.) for speed

The app makes use of SSE/AVX instructions if the CPU has such instructions. The app uses AVX instructions only if the CPU supports FMA instructions as well as AVX instructions. This option particularly speeds up FFT and resampling.

The use of SIMD instructions is fairly recommended because they make calculation noticeably faster, but they could make calculation slightly worse in accuracy because the XMM/YMM registers are shorter than the x87 FPU registers.

GPU convolution in single precision (DX12)

If the computer is equipped with a GPU, single-precision (32-bit floating point) convolution operations are performed on it for speed. See Performing Convolutions on GPU for more information.

Use WAVE FORMAT EXTENSIBLE for 24-bit/fp saving

When creating a WAV file to save a sound in 24-bit or higher precision, a WAVEFORMATEXTENSIBLE structure is used to record the format of the sound.

Use LAME (lame_enc.dll) for MP3 export

When exporting MP3 files, the app uses the LAME MP3 encoder instead of the ACM MP3 encoder. See How to Employ the LAME MP3 Encoder for more information.

Win10 friendly FLAC export (metadata & file extension)

When creating a FLAC file, the app sets the metadata in a manner that the title and some other descriptions about the sound are visible to Windows Explorer. Note that you also have to enable the option "Attach metadata" on the FLAC Encoder dialog box in order for such supplementary information to be actually written.

The app also uses the file name extension .FLAC rather than .FLA if the file name specified by the user lacks the extension part.

Show menu items for 1-bit audio export

An extra submenu is placed in the main menu hierarchy. It is located at [Edit] > [1-bit Export] and shows a few commands for 1-bit audio (DSD) export. Note that it is the selection part of the sound that will be exported.

Rms Weighting

This property determines which weighting filter is used for rms (root mean square) measurements. The default is flat weighting.

[Sazanami Help]

ReadMe
Usage Notes
Settings
Supported File Formats
Technical Information
Version History
Donations Welcome
Help in Japanese

Copyright (c) 2026 Narumi Watanabe.
All Rights Reserved.